Today, students will be adding posts to their blogs to describe how they were able to make a light bulb light up. The interesting thing is that different groups of students lit the bulb in different ways. See if you can find the different ways they found, and see if their explanations are clear enough that you could repeat their activity.
It is very easy to light a light bulb all you need to do is get a wire,battery and a mini light bulb.Then you put the tip of the wire under the battery. After that you put the other tip of the wire on top of the battery. finally you put the mini light bulb on top of the battery.Then you conect the wire on the side of the light bulb on top of the battery and you got a glowing light bulb.
To make a lightbulb light, I had a wire, a battery and a lightbulb. To make a lightbulb light, I did: the wire on the bottom of the battery and the lightbulb on top of the battery, then I put the other end of the wire on the meal part of the lightbulb. And that is how to light a lightbulb!
In sience this week we have been studing electricty with are awsome sience teacher. We learned how to light up a mini sized light bulb with a D Cell and a red wire.Electricty is in your t.v,computer, lights,phone,and more .electricty can be dangrus if not used write.
We used a mini light bulb a wier and a battery. I put part of the wier on the bottom of the battery . Then i put the lightbulb on top and the other part of the wier on the light bulb meatal looking thing.
For the past few days in scince we have ben learning how to trun on a lightbulb by useing a medum sized duobel a battery,one short brocken red wiers,and a minecher lightbulb.First what you do is put one end of the wier under the battery .Then you put the lightbulb on top of the meatel part that sticks out of the battery.Next you put the other end of the wier on the side of the battery.Here are some pics of the meaterals.
I scince we are lighting a light bulb with a battery and one wires. So first you put one end of the wire to the bottom of the battery.
Then you put the Light bulb on the top of the battery where there is a thing that look like a button on the battery.
Next, you get the other end of the wire and touch the side of the light buld. If you do it right your light bulb will light up!!!!!!!!!!
In sience we got to light. It was so easy and fun.I will tell you the steps to do it.
step1:You need a D-Cell Batery.
step2:You need a wire.
step3:you need a light bulb.
you put the end of the bottem of the battry. Next you put the light bulb to the side. And you put the wire on the wire. Then the light bulb schould light up.
In science we are learning how to light up a light buld. We used a d-cell
We used a wire.
We used a light bulb.
First we put one part of the wire on the bottom of our d-cell battery.Then we put our light bulb on the top of our light bulb then we connected our wire to our light bulb and it light up.
Thats how I light up my light bulb.
The things you wll need is an light bulb and a battrey alos a cord. you take the cord and put it on the bottem of the battrey then you put the light bulp on top of the battrey and put a cord on the top./then if it get to hot that means your doing some thing rong.Then if you do it right you will get your magic………….WOW
First you attach the battery to the wire.
Then you put the light bulb on top of the battery.
Next you attach the wire to the metal part of the light bulb.
Then it should light up.
The other way is to put 2 wires under it and make a circle.
Next you attach both sides to the light bulb.
then you put one side one the top of the battery.
it will look like this picture of the battery attached to the wires.
and one on the top and one wire on the battery
To light a lightbub with two wires you have to get a lightbub,a batre and t wo wires.To get it to light up you should put one wires on the side of the batter and put the other on the other side of the bater.Then they should make a corv at the top.Next you put the lightbub on top of the wires wire they are up in the air.Lest you put one wire on the side of the lightbub and one of the wires on the bottom of the lightbub.That is how you light a lightbub.
This is how you light up a lightbalb with two wires a D-CELL batery and a mini lightbalb. First ,you put the D-CELL on its side .Then, you take the two wires and you put the wires on the two sides of the batery and make it into a circle shape by bending the wires but dont put the wires on the colored side of the batery put them on the side with the bump and circle part .Next, you take the mini lightbalb and take the wires and put them on the bottom and the side of the lightbalb.Last, your lightbalb will light up and if you dont do it right you will feel a little shock if you do then start all over again.
First,you need a battery and two and a light bulb.Second,you need to put the two wires and on the battery.Finally,you put the light bulb on the two wires.Thats how you light a light bulb.
It a great